In many homes in Houston, hardwood floors are one of the most beautiful focal points of the house. They come in a wide variety of woods and can be finished in almost any color and finish you can imagine. Although hardwood floors are very durable and resistant to traffic, proper care and maintenance are essential to keep them beautiful for many years. Taking care of your solid oak flooring can help you prolong your life and keep you looking new. Wood floors become a common choice as an environmentally friendly natural product, offering years of use and enjoyment while adding warmth, comfort, and character to any home.
Here are the top tips to help maintain your beautiful oak floor:
Perform regular dirt and dust sweep
For you to keep your oak floor free of dirt and dust, it is advisable to sweep and vacuum regularly. Sand is not noticeable when you have rugs, but you’ll notice more when you choose real oak flooring. You can use a vacuum cleaner, make sure the brush accessory is connected so that you can sweep and vacuum at the same time, removing all the dust between card slots and plates. However, it is important to use only a soft bristle broom to prevent damage to your floors. Similarly, when using a vacuum cleaner, be sure to add a very soft bristle brush.
Clean with less water
If you want to protect your new oak floor, the number one rule is to keep water and other liquids at all costs. Water causes wood to expand, which can cause swelling, warping and a host of other problems that can be difficult or impossible to solve. If your old oak floor is installed in your kitchen, be sure to place carpets in front of the sink to avoid splashing. You must also use a dry mop to clean after meals.
Be careful when using water on your wood floors.
Instead, use water sparingly to reduce the risk of becoming too wet. Remember that this is wood and will absorb moisture, which can cause mold and even long-term deformation. Solid wood flooring is relatively easy to maintain and maintain with a useful floor cleaner, which is mixed according to instructions and blotted to the floor. Be sure to pass on with clean water and mop to eliminate any solution. It is advisable to see who your supplier recommends making sure that you are using a good quality product that will treat the wood, help you maintain it and help you retain its beautiful finish.
Avoid some cleaning products.
In addition to water, avoid using self-polishing wax, soap, and ammonia on the oak floor. Some cleaners can also leave residues very difficult to remove. Use only wax recommended by the manufacturer of your floors. You should also be careful not to wax your floors. Just use a little at first and improve to see if that’s enough if you cannot try to add a bit more. You may want to limit hair removal to areas on your floor that are getting a lot of traffic.
Use a floor cleaner
When buying a parquet cleaner, it is advisable to first test a tiny part of the soil with the mixture to see how it reacts. Do it one day, for example, in a place that can be covered by a piece of furniture. If all goes well the next day, continue with the rest of the soil.
Give it a Polish treat.
The best way to take care of your solid oak flooring and upkeep is to talk with your supplier and tell them how they recommend you take care of your floors. Remember that you will want to polish them from time to time. Polish treats wood keeps it in good condition and gives it a shiny finish. It’s not necessary to polish every day or even every week, every two weeks or every month is more than enough for your wood floors to take advantage of the benefits of polishing.
Use professional cleaners
Make sure the flooring specialist you use has many years of industry experience and knowledge and is known for its excellent service and support. They should be able to advise you on the right flooring solutions, as well as maintenance, installation and maintenance tips to help you get the most out of your wood floor in the future.
Repair or replace striped parts
If your oak flooring has a damaged panel that cannot be repaired, you can replace it. If the card is near the edge of the ground, you can remove the base plate, then remove the damaged card and place it on the replacement card. If the board is not in an area easily accessible from your floor or if you have a board floor glued, you must cut the board and replace it with a new board. For your new board to fit in the hole left by the old board, you will have to cut the tongue before putting it in place.
If your oak floor is scratched or calibrated, you can repair this damage by using a repair kit or wood putty. Start by cleaning the damaged area. Then follow the application instructions provided by the sealant or repair kit. Fill the indicator or scrape with the sealant with the applicator or a toothpick. Smooth the sealant on the surface of the board so that it is level and clean the excess. Allow the sealant to dry.
Screen your floor
You may want to check your oak floor once a year to make it look good. This process involves lightly scratching the surface of the floor and then covering it with a new light finish. It’s easy to do, and if you continue, you may never have to worry about complete soil renewal. Keep in mind these simple maintenance rules, and your floors will be new for years to come.
Finally, be sure to check your floors from time to time to make sure they meet your needs and provide you with the finish you want to achieve. Always make sure you buy your wood from a quality wood company that can offer you the best quality. Although it is easy to clean and maintain your solid oak flooring, condition plays an important role. Good quality wood flooring will last for many years, will survive and provide a good return on your long-term investment.
