You’ll want to prepare your garage floor for epoxy coating before any sort of sealant is applied. Getting your floors ready for this coating will help to ensure that the sealant lasts for a longer period of time. Preparing your floors in advance will also make it easier to apply the epoxy coating.
There are many different ways to prep your floors in advance. These are a few options that are worth exploring.
Make Sure Your Flooring Is Completely Clean
More than anything else, you’ll want to make sure that the surface the epoxy is being applied to is completely clean. If the flooring is covered in dust and debris, that grime is going to wind up trapped beneath the epoxy sealing. This could cause the sealant to be applied unevenly.
You should take the time to thoroughly sweep and mop your floors before any sort of coating is applied. You’ll want to give the floors time to dry as well. You should make sure that the sealant is being applied to a clean and fresh surface.
Remove Everything From Your Garage
Every bit of your floors needs to be coated with epoxy. This means that you’ll need to clear everything out of your garage before the process can get started. If you store a lot of items in your garage, this could be a long process. With that said, it will have to be done before your floors can be coated.
You’ll need to make sure you have a place to store all of the items that you are removing from your garage so that they won’t be damaged in any way. Even if you’ve already cleaned your floors, you’ll want to make sure you clean them again after your garage is cleaned out. It’s likely that there will be a lot of dust in your garage when these items are removed.
Consider Sand Blasting Or Grinding
In some cases, grinding the floor down can make it easier to properly apply a sealant. If you do decide to go this route, you’ll want to make sure you’re completely familiar with the tools that you are using. You’ll also want to make sure you have access to the right kinds of tools.
Even if you don’t have access to a sandblaster, you may be able to rent one for this project. You should work the etch your garage floor so that you’re better prepared to apply sealant.
There are a number of other tools that you can use that can deliver the same kinds of results. For example, you could use some sort of acid solution designed for chemical etching. No matter what you do, it’s best to be cautious and avoid damaging your floors.
Take the time to prepare your garage floor for epoxy coating. If you don’t feel like you’re able to properly prepare your floors, you should hire professionals that will be able to prep your floors and apply this sealant for you. When you work with pros, you’ll have less to worry about and better results.